Description
Hood #1 - Hood-2(New Right) - Job #5467155
6024ND-2-PSP-F - 9ft 0" Long Exhaust-Only Wall Canopy Hood with 18" Wide Front Perforated Supply Plenum with Built-in 3" Back Standoff
430 SS Where Exposed
Insulation for the PSP Housing - Front
FILTER - 20" tall x 16" ( 19.625" by 15.625") wide Stainless Steel Captrate Solo filter with hook, ETL Listed. Particulate capture efficiency: 85% efficient at 9 microns, 76% efficient at 5 microns. Used on hoods shipped AFTER 7/27/17.
6 - Recessed Round LED fixture and LED Light, 3500 K warm output.
3 - EXHAUST RISER - Factory installed 16" Diameter X 4" Height
1 - FIELD CUT, SHIP LOOSE - SUPPLY RISER - 12"x 24" Supply Riser with Volume Dampers
3 - 1/2 Pint Grease Cup New Style, Flanged Slotted 2 - FIELD WRAPPER 17.00" High Front, Right
1 - RIGHT VERTICAL END PANEL 27" Top Width, 21" Bottom Width, 80" High Insulated 430 SS 1
Hood #2 - Dish Hood - Job #5467155
4824VHB-G - 6ft 6" Long Condensate Hood, w/ Full Perimeter Gutter
1 - 430 SS - 100% Application
1 - EXHAUST RISER - Field Cut 10" Diameter X 4" Height
1 - FIELD WRAPPER 17.00" High Front, Left, Right 1
Electrical System #1 - Item K25 - Job #5467155
DCV-2111 Demand Control Ventilation, w/ control for 2 Exhaust Fans, 1 Supply Fan, Exhaust on in Fire, Lights out in Fire, Fans modulate based on duct temperature. INVERTER DUTY 3 PHASE MOTOR REQUIRED FOR USE WITH VFD. Room temperature sensor shipped loose for field installation.Verify distance between VFD and Motor; additional cost could apply if distance exceeds 50 feet. Includes 2 Duct Thermostat kits.
1 - ESV222N02YXB571 - Variable Frequency Drive - 3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1 Enclosure, with 2RJ-45 FOR MODBUS
1 - ESV222N02YXB571 - Variable Frequency Drive - 3 HP Max., 200/240 V, Single or Three Phase Input, 9.6 A Max., NEMA 1 Enclosure, with 2RJ-45 FOR MODBUS
1 - Digital Prewire Lighting Relay Kit. Includes hood lighting relay & terminal blocks. Allows for up to 1400W of lighting each.
1 - Sonalert, Pluggable 2900Hz 48-120VAC Loud Fast Pulse AX# A0017031 1 - Converter for PWM signal on ECPM03 board to a 0-10 VDC reference signal.
1 - Thermistor CABLE - 18/2 AWG GREEN WHITE, plenum rated. USED for thermistor duct stat. Per Foot Price. 50 - CAT-5E CABLE - 15 Foot. 1
Duct Run #1 - 430 Stainless
(dish duct) DW10FRISER Single Wall Duct Riser With Retaining Rings, 10" Duct, Used on Field Installations. Includes 1/4-20 Hardware (8) Nuts (8) Bolts - (1) Single Bottom Ring (2) Top Rings 2 Pieces Per Assembly.
1 - (RC1) DW22DWRISER-2R-S Double Wall Riser Cover - Used On 18" Inner Riser, 4" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Riser Shell Assembly. Includes Insulation & Single V Clamps For Inner & Outer Connections.
1 - (RC2) DW20DWRISER-2R-S Double Wall Riser Cover - Used On 16" Inner Riser, 4" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Riser Shell Assembly. Includes Insulation & Single V Clamps For Inner & Outer Connections.
1 - (P1) DW1007LT Single Wall Duct 10" diameter, 7" long, flange at both ends. Stainless Steel.
1 - (P2) DW1018AJDKIT Single Wall Duct Adjustable, 10" diameter, 17.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P3) DW1090ASY Single Wall Duct 90 Degree Elbow, 10" Duct, Assembly. 1 - (P4) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P5) DW1035LT Single Wall Duct 10" diameter, 35" long, flange at both ends. Stainless Steel.
1 - (P6) DW1048AJDKIT Single Wall Duct Adjustable, 10" diameter, 47.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P7) DW1015ASY Single Wall Duct 15 Degree Elbow, 10" Duct, Assembly. 1 - (P8) DW1023LT Single Wall Duct 10" diameter, 23" long, flange at both ends. Stainless Steel.
1 - (P9) DW1030AJDKIT Single Wall Duct Adjustable, 10" diameter, 29.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel. .
1 - (P10) DW1090ASY Single Wall Duct 90 Degree Elbow, 10" Duct, Assembly. 1 - (P11) DW1035LT Single Wall Duct 10" diameter, 35" long, flange at both ends. Stainless Steel.
1 - (P12) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P13) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel. 1 - (P14) DW1035LT Single Wall Duct 10" diameter, 35" long, flange at both ends. Stainless Steel.
1 - (P15) DW1048AJDKIT Single Wall Duct Adjustable, 10" diameter, 47.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P16) DW10CHASESUPASY Single Wall Duct Vertical CHASE Support Assembly, 10" Duct. Parts are Zinc Coated.
1 - (P17) DW1090ASY Single Wall Duct 90 Degree Elbow, 10" Duct, Assembly. 1 - (P18) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P19) DW1029LT Single Wall Duct 10" diameter, 29" long, flange at both ends. Stainless Steel.
1 - (P20) DW1030AJDKIT Single Wall Duct Adjustable, 10" diameter, 29.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P21) DW10SUBRASY Duct Support Bracket Kit, 10" Duct, Used for Hanging Duct. 12 GA Steel, Clear Zinc Coating. - 2 Rings, 4 Brackets, & Hardware Bag 2.
1 - (P22) DW1090ASY Single Wall Duct 90 Degree Elbow, 10" Duct, Assembly.
1 - (P23) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P24) DW10SUBRASY Duct Support Bracket Kit, 10" Duct, Used for Hanging Duct. 12 GA Steel, Clear Zinc Coating. - 2 Rings, 4 Brackets, & Hardware Bag 2.
1 - (P25) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P26) DW1047LT Single Wall Duct 10" diameter, 47" long, flange at both ends. Stainless Steel.
1 - (P27) DW10SUBRASY Duct Support Bracket Kit, 10" Duct, Used for Hanging Duct. 12 GA Steel, Clear Zinc Coating. - 2 Rings, 4 Brackets, & Hardware Bag 2.
1 - (P28) DW1048AJDKIT Single Wall Duct Adjustable, 10" diameter, 47.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P29) DW1090ASY Single Wall Duct 90 Degree Elbow, 10" Duct, Assembly. 1 - (P30) DW1029LT Single Wall Duct 10" diameter, 29" long, flange at both ends. Stainless Steel.
1 - (P31) DW1030AJDKIT Single Wall Duct Adjustable, 10" diameter, 29.5" long, flange at one end With a 10" Adjustable Collar - Stainless Steel.
1 - (P32) DW1910TPDBEX Duct to Curb Transition 3/4" Down Turn, 19-1/2" Curb to 10" Duct, 16 GA Aluminized Steel. For Use With Exhaust Fans.
1 - (P33) DW10SUBRASY Duct Support Bracket Kit, 10" Duct, Used for Hanging Duct. 12 GA Steel, Clear Zinc Coating. - 2 Rings, 4 Brackets, & Hardware Bag 2.
1 - (P34) DW10SUBRASY Duct Support Bracket Kit, 10" Duct, Used for Hanging Duct. 12 GA Steel, Clear Zinc Coating. - 2 Rings, 4 Brackets, & Hardware Bag 2.
1 - (P35) DW1690DWASY-2R-S Double Wall Duct - 16" Inner 90 Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P36) DW1607DWLT-2R-S Double Wall Duct - 16" Inner Duct, 7" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Standard Part.
1 - (P37) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P38) DW1635DWLT-2R-S Double Wall Duct - 16" Inner Duct, 35" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P39) DW1635DWLT-2R-S Double Wall Duct - 16" Inner Duct, 35" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P40) DW1635DWLT-2R-S Double Wall Duct - 16" Inner Duct, 35" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P41) DW1647DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps. 1 - (P42) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P43) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P44) DW1602DWOFFSETASY-2R-S Double Wall Duct - 16" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P45) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P46) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P47) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P48) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P49) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P50) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P51) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P52) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P53) DW1629DWLT-2R-S Double Wall Duct - 16" Inner Duct, 29" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P54) DW1627DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 24.5" / Adjustment = 13.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P55) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4. 1 - (P56) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P57) DW1647DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P58) DW1690DWASY-2R-S Double Wall Duct - 16" Inner 90 Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P59) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P60) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
- (P61) 10320FLOSUPASY Duct - Vent - Chimney - 20" Shell - Support Plate Assembly - 28.250" Square Used On 24.250" Through Penetrations - Horizontal And Vertical - Includes Hardware.
1 - (P62) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P63) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P64) DW1635DWLT-2R-S Double Wall Duct - 16" Inner Duct, 35" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P65) DW1647DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P66) 10320FLOSUPASY Duct - Vent - Chimney - 20" Shell - Support Plate Assembly - 28.250" Square Used On 24.250" Through Penetrations - Horizontal And Vertical - Includes Hardware.
1 - (P67) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P68) DW1647DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P69) DW1623DWLT-2R-S Double Wall Duct - 16" Inner Duct, 23" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P70) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P71) DW1690DWASY-2R-S Double Wall Duct - 16" Inner 90 Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P72) DW1602DWOFFSETASY-2R-S Double Wall Duct - 16" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P73) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P74) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P75) DW1647DWLT-2R-S Double Wall Duct - 16" Inner Duct, 47" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P76) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P77) DW1647DWAJD-2R-S Double Wall Adjustable Duct - 16" Inner Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P78) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P79) DW1602DWOFFSETASY-2R-S Double Wall Duct - 16" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P80) DW16DWTEASY-2R-S Double Wall Duct - 16" Inner Tee Duct - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P81) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P82) DW1607DWLT-2R-S Double Wall Duct - 16" Inner Duct, 7" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell. Standard Part.
1 - (P83) DW1635DWLTTP-2R-S Double Wall Duct - 16" Inner Duct, 35" long - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell - Used With Transition Plate.
1 - (P84) DW2616TPDBEX Duct to Curb Transition 3/4" Down Turn, 26 1/2" Curb to 16" Duct, 16 GA Aluminized. Used on NCA16FA / NCA16HPFA & NCA18FA / NCA18HPFA. Transition Plate OD is 27.00" Designed For Use With Exhaust Fan. Non-Standard Part.
1 - (P85) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P86) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P87) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4. 1
- (P88) DW2024SADKIT Duct - Horizontal Saddle Support Kit, Used With 20" OD - Includes Uni-Strut Cut To Length, DW2024SAD, & Hardware Bag 4.
1 - (P89) DW16DWACCDOORCOV-2R-S Double Wall Duct - 16" Inner Access Door & 20" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 20" Stainless Steel Outer Shell.
1 - (P90) DW1890DWASY-2R-S Double Wall Duct - 18" Inner 90 Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P91) DW1830DWASY-2R-S Double Wall Duct - 18" Inner 30 Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P92) DW1829DWLT-2R-S Double Wall Duct - 18" Inner Duct, 29" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P93) DW1847DWAJD-2R-S Double Wall Adjustable Duct - 18" Inner Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P94) DW18DWTEASY-2R-S Double Wall Duct - 18" Inner Tee Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P95) DW18DWACCDOORCOV-2R-S Double Wall Duct - 18" Inner Access Door & 22" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P96) DW1802DWOFFSETASY-2R-S Double Wall Duct - 18" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P97) DW1847DWLT-2R-S Double Wall Duct - 18" Inner Duct, 47" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P98) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P99) DW1847DWLT-2R-S Double Wall Duct - 18" Inner Duct, 47" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P100) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4. 1 - (P101) DW1847DWLT-2R-S Double Wall Duct - 18" Inner Duct, 47" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P102) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P103) DW18DWTEASY-2R-S Double Wall Duct - 18" Inner Tee Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P104) DW18DWACCDOORCOV-2R-S Double Wall Duct - 18" Inner Access Door & 22" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P105) DW1847DWAJD-2R-S Double Wall Adjustable Duct - 18" Inner Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P106) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P107) DW1890DWASY-2R-S Double Wall Duct - 18" Inner 90 Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P108) DW1802DWOFFSETASY-2R-S Double Wall Duct - 18" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P109) DW1847DWLT-2R-S Double Wall Duct - 18" Inner Duct, 47" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P110) 10322FLOSUPASY Duct - Vent - Chimney - 22" Shell - Support Plate Assembly - 30.250" Square Used On Through Penetrations - Horizontal And Vertical - Includes Hardware.
1 - (P111) DW1835DWLT-2R-S Double Wall Duct - 18" Inner Duct, 35" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P112) DW18DWTEASY-2R-S Double Wall Duct - 18" Inner Tee Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P113) DW18DWACCDOORCOV-2R-S Double Wall Duct - 18" Inner Access Door & 22" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell. 1 - (P114) DW1835DWLT-2R-S Double Wall Duct - 18" Inner Duct, 35" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P115) DW1847DWAJD-2R-S Double Wall Adjustable Duct - 18" Inner Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1- (P116) 10322FLOSUPASY Duct - Vent - Chimney - 22" Shell - Support Plate Assembly - 30.250" Square Used On Through Penetrations - Horizontal And Vertical - Includes Hardware.
1 - (P117) DW18DWTEASY-2R-S Double Wall Duct - 18" Inner Tee Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P118) DW1811DWLT-2R-S Double Wall Duct - 18" Inner Duct, 11" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P119) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P120) DW1890DWASY-2R-S Double Wall Duct - 18" Inner 90 Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P121) DW1802DWOFFSETASY-2R-S Double Wall Duct - 18" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P122) DW1835DWLT-2R-S Double Wall Duct - 18" Inner Duct, 35" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P123) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P124) DW1835DWLT-2R-S Double Wall Duct - 18" Inner Duct, 35" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P125) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P126) DW1847DWAJD-2R-S Double Wall Adjustable Duct - 18" Inner Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell. Min Length = 11" / Max Length = 48.5" / Adjustment = 30.5" / Adjustable Section May Need To Be Cut. Includes single and double wall "V" Clamps.
1 - (P127) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4. 1 - (P128) DW1802DWOFFSETASY-2R-S Double Wall Duct - 18" Inner Duct Riser & 2 Degree Offset - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P129) DW18DWTEASY-2R-S Double Wall Duct - 18" Inner Tee Duct - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P130) DW18DWACCDOORCOV-2R-S Double Wall Duct - 18" Inner Access Door & 22" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P131) DW1807DWLT-2R-S Double Wall Duct - 18" Inner Duct, 7" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P132) DW1835DWLTTP-2R-S Double Wall Duct - 18" Inner Duct, 35" long - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell - Used With Transition Plates
1 - (P133) DW2618TPDBEX Duct to Curb Transition 3/4" Down Turn, 26 1/2" Curb to 18" Duct, 16 GA Aluminized. Used on NCA16FA / NCA16HPFA & NCA18FA / NCA18HPFA. Transition Plate OD is 27.00" Designed For Use With Exhaust Fan. Non-Standard Part.
1 - (P134) DW18DWACCDOORCOV-2R-S Double Wall Duct - 18" Inner Access Door & 22" Access Door Cover With Clamps - 2 Layers Reduced Clearance - 22" Stainless Steel Outer Shell.
1 - (P135) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - (P136) DW2226SADKIT Duct - Horizontal Saddle Support Kit, Used With 22" OD - Includes Uni-Strut Cut To Length, DW2226SAD, & Hardware Bag 4.
1 - 3M-2000PLUS Duct - 3M Fire Barrier 2000 Plus Silicone - Used as sealant to Seal Duct Joints. 25 - DW10CLASY Duct "V" Clamp With new design 14 Ga Brackets, 10" Duct, Assembly. 27 - DW16DWCLASY-2R-S Duct - 16" Duct - 20" Double "V" Clamp - 2R Insulation & Single "V" Clamp Included - Reduced Clearance. 22 - DW18DWCLASY-2R-S Duct - 18" Duct - 22" Double "V" Clamp - 2R Insulation & Single "V" Clamp Included - Reduced Clearance. 20
Buyouts - Local Built Roof curbs for KEF-1, KEF-2, KEF-3 and MPU 1
Factory Services - Service Design Verification for Demand Control Ventilation 1 - Service Design Verification for Hood 2
1 - Service Design Verification for Site Meeting w/ additional mileage charge.
1 - Service Design Verification Mileage Charge: (60.0) x 2 = 120.0 total miles
1 - Service Design Verification Minimum 1 Terms: